Daslight Virtual Controller DVC4 GZM

• Mini USB-DMX Interface
• 3 Configurable DMX Universes
• MiniSD Multi-Zone Stand Alone Memory
• Works with DVC3 and DVC4 Software
• Delivered with a USB Cable

Full Description

Dry Contact Ports

Trigger scenes in both live and stand alone mode via the 8 dry contact ports. Bridge the ground pin with pins 1-8 of the HE10 connector in order to start scenes from a push button or relay. The 8 ports can be combined in binary for up to 255 triggers.

Ethernet Connectivity

Hook up the GZM to your network and control it with Daslight over longer distances. The network connection also allows you to control the device in stand alone mode using the Easy Remote app for iPhone/iPad/Android.

Stand Alone

Each Daslight interface comes with either flash or microSD memory, allowing for programmed shows to be run in stand alone mode without a computer. Stand alone mode is perfect for smaller shows where a computer is not needed, as a backup in case of computer failure, or for architectural installations. The scenes can be changed via + and - push buttons on the controller, the dry contact ports, or over a network using the Easy Remote iPhone/iPad/Android app (DVC4 GZM).

Specifications

• Live Channels: 3072*
• Standalone Channels: 1024
• Mode: Full
• Software: DVC3, Daslight 4
• Ethernet: Yes
• Connector: Mini USB/RJ45**
• Memory: SD card
• Clock/Calendar: Yes
• Dry Contact Ports: 8

*1536 via the 3-pin and 5-pin pin DMX connectors, 1536 via art-net using the ethernet socket on the computer

**the RJ45 socket is used as an alternative to USB - this does not output art-net. The socket also allows the device to be controlled in stand alone with the Easy Remote iPhone/iPad/Android app